Excavator Maintenance Failure Code

13-01-2020

Excavator Maintenance Failure Code

P0107 (flashing code 71) Low atmospheric pressure sensor circuit input (open or shorted to ground)

Major symptoms of failure

Since the reserve is equivalent to 2000 m (6562 ft)

• Smoke emission at high altitude

• Insufficient output at low altitude


P0108 (flashing code 71) Atmospheric pressure sensor circuit input high (+ 5V short circuit)

Major failure symptoms

Since the reserve is equivalent to 2000 m (6562 ft)

• Smoke emission at high altitude

• Insufficient output at low altitude


P0112 (flashing code 22) Intake temperature sensor fault (low voltage fault, short to ground, short)

Major failure symptoms

• When starting at low temperatures, white smoke may be emitted.


P0113 (flashing code 22) Intake temperature sensor failure (high voltage failure to open or short circuit of power circuit)

Major failure symptoms

• When starting at low temperatures, white smoke may be emitted.


P0117 (flashing code 23) Engine coolant temperature sensor failure (low voltage failure, short to ground, short circuit)

Major failure symptoms

• At normal temperature: black smoke may be emitted and the engine makes a loud noise

• During idling at low atmospheric temperature: there may be unstable idling, engine stall, and exhaust of white smoke.


P0118 (flashing code 23) Engine coolant temperature sensor input high (open or short to power)

Major failure symptoms

• At normal temperatures: black smoke may be emitted and the engine makes a loud noise.

• During idling at low atmospheric temperature: the idling may be unstable, the engine may stall, and white smoke may be emitted.


P0182 (flashing code 211) Fuel temperature sensor failure (low voltage fault, short to ground)

Major failure symptoms

• Operability is affected.


P0192 (flash code 245) Common tank pressure sensor failure (low voltage fault, short circuit)

Major failure symptoms

• Possible engine stall

• Reduced output


P0193 (flashing code 245) Common rail pressure sensor failure (high voltage failure)

Major failure symptoms

• Engine may stall

 • Output drops


P0201 (flash code 271) No. 1 drive system of the nozzle is open

Major failure symptoms

• Vibrant engine vibration

• Unstable idling operation

• Output power drops

• Engine blow-by failure


P0202 (flash code 272) No. 2 drive system of the nozzle is open

Major failure symptoms

• Vibrant engine vibration

• Unstable idling operation

• Output power drops

• Engine cylinder failure


P0203 (flash code 273) No. 3 drive system of the nozzle is open

Major failure symptoms

• Vibrant engine vibration

• Unstable idling operation

• Output power drops

• Engine blow-by failure


P0204 (flash code 274) No. 4 drive system of the nozzle is open

Major failure symptoms

• Vibrant engine vibration

• Unstable idling operation

• Output power drops

• Engine cylinder failure


P0205 (flash code 275) No. 5 drive system of the nozzle is open

Major failure symptoms

• Vibrant engine vibration

• Unstable idling operation

• Output power drops

• Engine deflagration abnormal


P0206 (flash code 276) No. 6 drive system of the nozzle is open

Major failure symptoms

• Vibrant engine vibration

• Unstable idling operation

• Output power drops

• Engine deflagration abnormal


P0219 (flash code 543) overspeed

Major failure symptoms

• Output drops


P0237 (flash code 32) Boost pressure sensor failure (low pressure failure, open circuit)

Major failure symptoms

• Smoke emission.


P0335 (flash code 15) crankshaft sensor failure (no signal)

Major failure symptoms

• Output drops

• White smoke

• The engine may vibrate violently

• Engine may stall (can restart when camshaft position sensor is normal


P0336 (flashing code 15) Crankshaft sensor failure (signal failure)

Major failure symptoms

• Output drops

• White smoke

• The engine may vibrate violently

• Engine may stall (can be restarted when camshaft position sensor is normal)


P0340 (flash code 14) Cam sensor failure (no signal)

Major failure symptoms

• Engine does not start (restart)

• The operating status remains unchanged during engine operation


P0380 (flashing code 66) Glow plug relay circuit failure

Major failure symptoms

• Reduced starting ability


P0487 (flash code 44) EGR position sensor failure

Major failure symptoms

• Operability is affected.


P0488 (flash code 45) EGR valve control failure

Major failure symptoms

• Emissions are affected.


P0606 (flashing code 51) CPU failure P0606 (flashing code 52) CPU failure main symptoms

• Output drops • Cannot start


P0611 (flashing code 34) Charging circuit failure

Major failure symptoms

• Vibration of the engine

• Unsteady idle speed

• Output drops

• Engine cylinder failure

• Engine may stall


P1093 (flash code 227) No pump pressure supply

Major failure symptoms

• Vibration of the engine

• Unsteady idle speed

• Output drops

• Engine blow-by failure

• Smoky

• Engine stall

• May output too much


P1095 (flash code 225) pressure limiter on

Major failure symptoms

• Output drops

• Surge


P1173 (flash code 542) overheating

Major failure symptoms

• Output drops

• When the temperature exceeds 108 ° C (226 ° F), the fuel flow is regulated during overheating.


P1225 (flashing code 31) Idle speed increase / decrease switch failure

Major failure symptoms

• Operability is affected.


P1277 (flash code 24) Accelerator sensor 1 failure (low voltage failure)

Major failure symptoms

• System failure: no backup

• System failure: The accelerator opening angle is controlled to 0%.


P1345 (flash code 16) cam sensor is out of phase

Major failure symptoms

• The operating status remains unchanged during engine operation

• The engine does not start after the engine is stopped


P1625 (flash code 416) main relay failure

Major failure symptoms

• The engine does not start or the power cannot be turned off.


P1630 (flash code 36) A / D conversion failure

Major failure symptoms

• Output drops

• Smoky


P1631 (flashing code 55) 5-V power supply 1 voltage failure

Major failure symptoms

• Idle speed


P1632 (flash code 55) 5-V power supply 2 voltage failure

Major failure symptoms

Since the reserve is equivalent to 2000 m (6562 ft)

• Smoke emission at high altitude

• Insufficient output at low altitude


P1633 (flash code 55) 5-V power supply 3 voltage failure

Major failure symptoms

• At normal temperature: Exhaust black smoke, there may be a lot of engine combustion noise.

• During idling at low atmospheric temperature: possible idling instability, engine stall, white smoke emission.


P1634 (flashing code 55) 5-V power supply 4 voltage failure

Major failure symptoms

• Smoky


P1635 (flash code 55) 5-V power supply 5 voltage failure

Major failure symptoms

• Engine blow-by

• Output drops

• Smoky

• Engine may stall


U2104 (flash code 84) CAN bus failure

Major failure symptoms

• Set to idle.


U2106 (flash code 85) CAN timeout fault


P0183 (flashing code 211) Fuel temperature sensor failure (high voltage failure, open or shorted power circuit)


P0238 (flash code 32) Boost pressure sensor failure (high voltage failure, short circuit in power circuit, open ground)


P0341 (flashing code 14) Cam sensor failure (signal failure)


P0381 (Flashing code 67) Glow plug circuit malfunction


P0522 (flash code 294) Oil pressure sensor failure (low voltage failure, open circuit, short to ground)


P0523 (flash code 295) Oil pressure sensor failure (high voltage failure, open circuit, short to ground)


P0601 (flash code 53) ROM failure


P0612 (flashing code 34) Charging circuit failure


P0650 (blinking code 77) diagnostic lamp circuit failure


P1112 (flashing code 295) boost air temperature sensor failure (low voltage fault, short to ground)


P1113 (flash code 295) Boost temperature sensor failure (high voltage failure, open circuit, short circuit in power circuit)


P1261 (flash code 158) Fuel injector common drive 1 System failure


P1262 (flash code 159) Injector common 2 drive system failure


P1271 (flashing code 24) Accelerator sensor 1 ~ 2 contrast failure


P1278 (flashing code 24) Accelerator sensor 1 failure (high voltage failure)


P1282 (flash code 24) Accelerator sensor 2 failure (low voltage failure)


P1283 (flash code 24) Accelerator sensor 2 failure (high voltage failure)


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy